MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 16 IN 1
Reference:
IDMR16000
Description:
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 16 IN 1 it is the integral solution designed for beauty professionals looking for efficiency, versatility...
Description
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 16 IN 1 it is the integral solution designed for beauty professionals looking for efficiency, versatility and cutting-edge technology in a single piece of equipment. With 16 functions in a single unit, this machine allows for complete treatments (whether facial, hair, etc.) without the need for multiple devices, optimising time and maximising profitability in the clinic.
Its advanced technologies include facial radiofrequency for the stimulation of collagen and elastin, ultrasound to enhance the penetration of active ingredients, galvanic therapy for ionisation and descaling, high-frequency electrotherapy with a bactericidal and oxygenating effect, ultrasonic exfoliation spatula, and facial cleansing brush. It also has a vacuum system for the extraction of impurities, a cold hammer to seal in treatments and a microneedling head with LED light, ideal for skin biostimulation and cell regeneration.
Its advanced steam system incorporates ozone options for skin purification, with the possibility of using essences, herbs to enhance therapeutic effects and aromatherapy essential oils to offer a holistic approach to treatments.
Complemented by a Wood Lamp for in-depth diagnosis and a magnifying lamp, this machine allows the professional to carry out a detailed and personalised analysis before each session.
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 16 IN 1 has been designed to offer maximum precision and efficiency in each procedure, making it an indispensable tool for beauticians looking to raise the quality of their services with a single multifunctional, compact and high-performance device.
16 professional utilities in a single machine:
1. Radiofrequency Therapy
• Emits electromagnetic waves that generate heat in the deep layers of the skin.
• Stimulates the production of collagen and elastin, improving firmness and elasticity.
• Reduces flaccidity, attenuates wrinkles and expression lines.
• Improves blood circulation and helps to redefine the facial contour.
2. Spray Therapy
• Disperse a fine mist of toner, serum or moisturising lotion onto the skin.
• Refresh and calm the skin after exfoliating or invasive treatments.
• Promote hydration and revitalisation of the skin, leaving it more luminous.
3. Vacuum Therapy
• Use controlled suction to extract impurities, blackheads and excess oil.
• Improves skin oxygenation and helps to reduce pore size.
• Promotes microcirculation and helps to reduce swelling in congested areas.
4. Galvanic Therapy
• Applies low-intensity galvanic current to enhance the penetration of active ingredients.
• Facilitates deep cleansing by eliminating toxins and excess oil (descaling).
• Helps improve skin hydration and nutrition.
5. Ultrasound Therapy
• Emits high-frequency waves that generate microvibrations in the skin.
• Promotes the absorption of cosmetic products, improving their effectiveness.
• Stimulates cell regeneration and microcirculation.
• Reduces swelling and improves skin elasticity.
6. Facial cleansing
• Deep cleanses using a rotating brush.
• Removes impurities, dead cells and excess oil, leaving the skin softer.
• Prepares the skin for subsequent treatments, enhancing their effectiveness.
7. Ultrasonic peeling
• Uses a special blade to remove dead cells, impurities and excess oil from the skin.
• Helps to remove blackheads and dirt accumulated in the pores without causing damage or irritation.
• Facilitates the penetration of serums and creams into the skin to enhance their benefits.
• Promotes blood circulation and stimulates collagen production, improving the texture and luminosity of the skin.
8. Cryotherapy
• Cold Hammer Head.
• Applies cold to the skin to soothe it after intensive treatments.
• Reduces redness, tightens pores and helps to reduce swelling.
• Provides a tightening and firming effect on the skin.
9. High Frequency Electrotherapy
• Emits high frequency currents with gas electrodes.
• Has an antibacterial effect, ideal for acne-prone skin.
• Improves cellular oxygenation and stimulates blood circulation.
• Helps to disinfect the skin and reduce inflammation.
10. Microneedling with light
• Uses microneedles to stimulate the production of collagen and elastin.
• Improves the texture of the skin, scars, blemishes and fine lines.
• It includes a small light to improve the vision of the treated area.
11. Steam
• Opens the pores and facilitates the extraction of impurities: Steam allows for deep cleansing, eliminating dirt and toxins from the pores.
• Improves the absorption of cosmetic products: By opening the pores, it increases the penetration
Product Details
1. STEAM/OZONE THERAPY:
A. Filling the tank:
• Filling mode 1. The access plug to the water tank for steam is located on the top of the machine. Unscrew the plug and fill the tank (or cup) between the minimum and maximum marks, preferably with distilled water. Screw the plug back on before turning on the steam. Be careful when refilling the tank to avoid burns.
• Filling mode 2. You can also unscrew the water tank directly to fill it and then screw it back on. Allow the tank to cool down first to avoid burns and accidents. If you need to refill it but it is still hot, use filling mode 1 through the cap on the top of the machine.
B. Switching on: Press the ON/OFF button to activate the facial steamer in standby mode. The tank heating element will start to heat the water. The default timer is set to 30 minutes. Once the time has elapsed, the steam will switch off automatically.
C. Activating the steam. The Steam button activates the steam output. The steam function works independently and can be used simultaneously with other functions.
D. Activating the ozone. Press the Ozone button to activate or deactivate the ozone function.
E. Cleaning the water tank: To clean the water tank, allow it to cool down first and then unscrew it for cleaning. Rinse it with water; you can use a mild, neutral soap (do not use corrosive products). Screw it back onto the machine for use. Clean the tank regularly, preferably after each use, to prevent standing water.
2. STEAM THERAPY WITH NATURAL ESSENCES:
A. Adding herbs or essences: To add herbs or essences to the steam tank, unscrew the cap located at the top of the machine. This cap consists of two parts: the cap itself and a perforated reservoir designed to hold the herbs used in steam treatments. Both elements are held together by pressure, so you must pull the herb reservoir to separate it from the cap.
Once separated, place the herbs in the reservoir and reassemble by pressing until it fits correctly. If you prefer to use natural essences, you can add them directly to the water in the tank, provided they are water-based and not oily. Finally, place the complete cap (cap + reservoir) back on top of the machine and screw it on tightly before turning on the steam.
B. Starting up: Follow the same steps described in point 1 (Steam/Ozone Therapy).
C. Cleaning the water tank: Follow the same steps described in point 1 (Steam/Ozone Therapy).
3. STEAM THERAPY WITH AROMATHERAPY:
A. Adding aromatherapy essences. Remove the blue cap from the steam head and place a cotton ball soaked in aromatherapy essences inside. Replace the cap and operate the steam function as normal.
B. Starting up: Follow the same steps described in point 1 (Steam/Ozone Therapy).
4. ULTRASONIC THERAPY:
A. Selecting ultrasonic therapy: Press the ON/OFF button on the control panel to activate the ultrasonic function.
B. Ultrasound head selection: To work with the flat head or the peaked head, select it on the control panel using the ‘Select’ button.
C. Activating the ultrasound head: Both the flat head and the peaked head will remain inactive until the activation/deactivation button on the heads themselves is pressed. When the head is active, the head indicator light will illuminate red. Press the button again to deactivate it.
D. Selecting the working time: The adjustable working time ranges from 1 to 60 minutes. By default, the working time of the flat head is 10 minutes, but this can be changed using the arrows on the control panel.
E. Selecting the working intensity: The working intensity ranges from 1 to 10 levels. By default, the intensity level of the flat head is level 3, but it can be changed on the control panel using the arrows.
F. Selecting the working frequency: To calibrate the frequency of the ultrasonic function, press and hold the on/off button on the selected head handle for a few seconds. The frequency calibration is independent for each head. When the ‘Intensity’ digital display on the control panel starts flashing, the device is in frequency calibration mode. Use the arrows to adjust the energy to the desired level, selecting a value between 1 and 99. Once the frequency has been set, press and hold the head button again for a few seconds to exit calibration mode.
G. Selecting the operating mode: You can change the operating mode of the active head on the control panel using the ‘Mode’ button. The operating mode can be alternating or continuous.
H. Alternating use of the heads: You can alternate between the flat and pointed heads by selecting them on the control panel and activating or deactivating them with the button on the heads, but this requires resetting the intensity and working mode settings.
5. FACIAL CLEANING BRUSH:
A. Activating the cleaning brush: Press the ON/OFF button on the contr
ITALIAN DESIGN
8432729112115
GPSR
| Manufacturer Information expand_more | |
|---|---|
| Is European? | Yes |
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 16 IN 1 it is the integral solution designed for beauty professionals looking for efficiency, versatility...