BEAUTY-SYSTEM EXCELLENS 8 IN 1 MULTIFUNCTION FACIAL BEAUTY-SYSTEM EXCELLENS 8 IN 1
Reference:
IDMR8000
Description:
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 8 IN 1 is the ideal solution for beauty professionals looking for efficiency, versatility and cutting-edge...
Description
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 8 IN 1 is the ideal solution for beauty professionals looking for efficiency, versatility and cutting-edge technology in a single piece of equipment. Designed to offer complete facial treatments, this innovative machine optimises time, maximises profitability and reduces the need for multiple devices in the treatment room.
Its advanced technologies include radiofrequency to stimulate the production of collagen and elastin, ultrasound to enhance the penetration of active ingredients, and vacuum therapy, which uses controlled suction to extract impurities, blackheads and excess oil, improving skin oxygenation and reducing pore size. In addition, it has a facial cleansing brush to remove residue and dead cells, and an ultrasonic exfoliation spatula, which performs a deep clean without irritating the skin, and an advanced spray therapy, ideal for moisturising, refreshing and toning the skin with specialised solutions.
To enhance the results, it incorporates cryotherapy, ideal for calming the skin, reducing inflammation and closing the pores, offering a rejuvenated and uniform finish. Its advanced LED phototherapy with 7 colours allows it to address different skin needs, from repair and rejuvenation to oil control and spot reduction, providing a personalised treatment for each skin type.
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 8 IN 1 has been created to offer maximum precision and effectiveness in each procedure, making it an indispensable tool for beauticians looking to raise the quality of their treatments with state-of-the-art technology in a multifunctional, compact and high-performance device.
1. Radiofrequency Therapy
• Emits electromagnetic waves that generate heat in the deep layers of the skin.
• Stimulates the production of collagen and elastin, improving firmness and elasticity.
• Reduces flaccidity, attenuates wrinkles and expression lines.
• Improves blood circulation and helps to redefine the facial contour.
2. Spray Therapy
• Dispenses a fine mist of toner, serum or moisturising lotion onto the skin.
• Cools and soothes the skin after exfoliating or invasive treatments.
• Promotes hydration and revitalisation of the skin, leaving it more luminous.
3. Vacuum Therapy
• Uses controlled suction to extract impurities, blackheads and excess oil.
• Improves skin oxygenation and helps to reduce pore size.
• Promotes microcirculation and helps to reduce swelling in congested areas.
4. Ultrasound Therapy
• Emits high-frequency waves that generate microvibrations in the skin.
• Promotes the absorption of cosmetic products, improving their effectiveness.
• Stimulates cell regeneration and microcirculation.
• Reduces swelling and improves skin elasticity.
5. Facial Cleansing
• Deep cleanses using a rotating brush.
• Removes impurities, dead cells and excess oil, leaving the skin softer.
• Prepares the skin for subsequent treatments, enhancing their effectiveness.
6. Ultrasonic Peeling
• Uses a special blade to remove dead cells, impurities and excess oil from the skin.
• Helps to extract blackheads and dirt accumulated in the pores without causing damage or irritation.
• Facilitates the penetration of serums and creams into the skin to enhance their benefits.
• It favours blood circulation and stimulates collagen production, improving the texture and luminosity of the skin.
7. Cryotherapy
• Cold Hammer Head.
• Applies cold to the skin to soothe it after intensive treatments.
• Reduces redness, tightens pores and helps reduce swelling.
• Provides a tightening and firming effect on the skin.
8. Phototherapy
• Adjustable LED mask for phototherapy with 7 colours:
- Yellow light (583nm): Improves erythema and redness.
- Green light (532nm, penetration: 0.5-2mm): Deep repair and rejuvenation of white skin.
- Red light (640nm, penetration: 1-6mm): Rejuvenation, lightening of wrinkles and acne marks.
- Blue light (423nm, penetration: 1mm): Balanced secretion and oil control.
- Purple light (400nm): Repairs acne and lightens blemishes.
- Turquoise light (490nm): Soothes the skin and balances secretion.
- White light (from 423 to 640nm): Breaks down blemishes and improves fine lines.
Product Details
1. ULTRASOUND THERAPY:
When this device is switched on, the Ultrasound option will be active by default and in the first position.
A. Selecting operating time: By default the operating time will be 30 minutes. This time can be varied in 1-minute intervals by pressing the left arrow ‘"<" to decrease or the right arrow "‘>" to increase. You can choose a time between 1 and 60 minutes.
B. Intensity selector: Select the intensity level from 5 levels. Use the left arrow ‘<’ to decrease or the right arrow ">" to increase the intensity according to the needs of the treatment and the sensitivity of the patient.
C. Selection of working mode: You can choose between working modes A and B. By default, the default working mode is A. Use the "<>" arrows to change the mode.
• Working mode A: continuous frequency.
• Working mode B: discontinuous frequency.
D. Start-up: Touch the "OFF" button, which will change to ‘ON’ so that the machine starts working. Press "ON" if you want to deactivate it to pause or stop the treatment (the text "OFF" will appear again on the button).
2. RADIOFREQUENCY THERAPY:
The Radiofrequency is in the second position on the control console.
A. Working time selection: By default, the working time will be 30 minutes. You can vary this time in 1-minute intervals by pressing the left arrow "<" to decrease or the right arrow ">" to increase. You can choose the time between 1 and 60 minutes.
B. Intensity selector: Select the intensity level from 5 levels. Use the left arrow "<" to decrease or the right arrow ">" to increase the intensity according to the treatment needs and the patient's sensitivity.
C. Selection of working mode: You can choose between working modes A and B. By default, the working mode is A. Use the "<>" arrows to change the mode.
• Working mode A: continuous frequency.
• Working mode B: discontinuous frequency.
D. Start-up: Touch the "OFF" button, which will change to "ON" so that the machine starts working. Press "ON" if you want to deactivate it to pause or stop the treatment (the text "OFF" will appear again on the button).
3. ULTRASONIC PEELING:
Ultrasonic Peeling is in the second position on the control panel.
A. Working time selection: By default, the working time will be 30 minutes. You can vary this time in 1-minute intervals by pressing the left arrow ‘<’ to decrease or the right arrow ">" to increase. You can choose a time between 1 and 60 minutes.
B. Intensity selector: Select the intensity level from 5 levels. Use the left arrow "<" to decrease or the right arrow ">" to increase the intensity according to the treatment needs and the patient's sensitivity.
C. Selection of working mode: You can choose between working modes A and B. By default, the working mode is A. Use the ‘<>’ arrows to change the mode.
• Working mode A: continuous frequency.
• Working mode B: discontinuous frequency.
D. Start-up: Touch the ‘OFF’ button, which will change to ‘ON’ so that the machine starts working. Press "ON" if you want to deactivate it to pause or stop the treatment (the text ‘OFF’ will appear again on the button).
Facial Cleansing is in the fourth position on the control console.
A. Selection of rotation direction: You can choose between the options "Forward" or "Reverse" to select the direction of rotation. You can change it at any time.
B. Selecting working time: By default, the working time will be 30 minutes. You can vary this time in 1-minute intervals by pressing the left arrow "<" to decrease or the right arrow ">" to increase. You can choose a time between 1 and 60 minutes.
C. Intensity selector (speed): Select the speed intensity level from 5 levels. Use the left arrow "<" to decrease or the right arrow ">" to increase the speed according to the needs of the treatment and the sensitivity of the patient.
D. Start-up: Touch the ‘OFF’ button, which will change to ‘ON’ so that the machine starts working. Press ‘ON’ if you want to deactivate it to pause or stop the treatment (the text "OFF" will appear on the button again).
5. VACUUM THERAPY:
Suction is in the fifth position on the control console.
A. Work time selection: By default, the work time will be 30 minutes. You can vary this time in 1-minute intervals by pressing the left arrow ‘<’ to decrease or the right arrow ">" to increase. You can choose the time between 1 and 60 minutes.
B. Start-up: Touch the "OFF" button, which will change to "ON" so that the machine starts working. Press "ON" if you want to deactivate it to pause or stop the treatment (the text "OFF" will appear again on the button).
C. Suction control: To work with total comfort and control, there is a hole in the vacuum head itself that you should cover with your finger to make the suction effective. When you need to stop the suction, while worki
ITALIAN DESIGN
8432729112122
GPSR
| Manufacturer Information expand_more | |
|---|---|
| Is European? | Yes |
MULTIFUNCTION BEAUTY-SYSTEM EXCELLENS 8 IN 1 is the ideal solution for beauty professionals looking for efficiency, versatility and cutting-edge...