FACIAL AESTHETIC TREATMENT 2 IN 1

FURNITURE AND APPLIANCES

Reference:

IDEBEAUTY-2IN1

Description: FACIAL AESTHETIC TREATMENT FOR PROFESSIONAL USEAQUAPEEL: exfoliation using micro-bubble bubbles. This function uses a spiral rotation to exfoliate...

€790.00

Tax included

Quantity

We will ship this product from day 23/03/2024.

Description

FACIAL AESTHETIC TREATMENT FOR PROFESSIONAL USE
AQUAPEEL: exfoliation using micro-bubble bubbles. This function uses a spiral rotation to exfoliate pores, soften dead skin cells, deep cleanse the skin, remove blackheads, improve skin tone, leave skin clean and smooth, with a special micro abrasive tip to remove dead skin cells. The kit includes 7 interchangeable tips: 5 clear PC tips and 2 Micro Skin Sculpting tips.
PULVERISATION: the high pressure of this function breaks down water and ionises oxygen which, combined with the active ingredients (added in the bottle (s)), provides the skin with nutrients and hydration in the form of fine atomised molecules to revitalise the skin.

Product Details

How to use

• The default start time “Time” is 30 minutes and the adjustable time range is 1 to 60 minutes.
• Press the “Select” key to select the function you require. When the light comes on, the function is already active. Each light indicator has corresponding accessory icons for each function. Use them appropriately.
• Spray Probe options::
- Intensity is adjustable “Intensity” and is divided into 1-9 speeds.
- Works with 3 adjustable modes:
1. Continuous output mode.
2. Discontinuous mode, stops for 0.5 s and works for 0.5 s.
3. Discontinuous output mode, for 0.5 s, it operates for 1 s, for 0.5 s it operates for 2 s.
• Aquapeel options: Press the “Vacuum” suction button to turn the probe on (when the light is on, the probe starts working and when the light is off, the probe turns off).
- If you need the active ingredient solution from bottle A, open the “Water Flow” (Flow Control) on bottle A.
- If you need the active ingredient solution from bottle B, open the “Water Flow” of bottle B.
- f you need the active ingredient solutions from bottles A and B combined, open the “Water Flow” of bottles A and B and adjust the degree of suction from the MIN or MAX switch.
When the solution from bottle A or bottle B passes through the suction probe, the residue is collected in the waste bottle C.
When bottle C is full, the fill indicator will alarm and the suction probe will stop. At this time, remove the water from the C-bottle and put the empty bottle back in place to use it normally again.
• After pressing the corresponding function key (Ultrasound, Radiofrequency, Skin Scrubber, Aquapeel, Spray or Cryotherapy) on the function panel, press “ON/OFF” and the ON/OFF key on the probe to start/stop the function on the probe.